Penta Cressi

 

PENTA presents four crystals with an angle of view in all unprecedented directions. The side panels have been made in curved anti-impact polycarbonate. Although the objective visibility of a mask depends on the frontal area, the side panels increase the luminosity and the sensation of field visivo and allow an "intuitive" vision of what happens in the lateral zones, adding about 10º of field.

Minimum thickness frame (6 mm) which lightens the mask weight to only 195 g with strip included. Radial assembly that does not require a fence to fix the crystals that increases the thickness of the mask, but it is the main casing itself that surrounds and presses the facial like a clamp on the crystals assembling the mask.

Reduced structure of the frame and facial envelope that allow a great approximation of the crystals to the eyes without problems of contact with the mount.

Inclined crystals 15º and extended above the cheekbones to increase the visibility inferior by more than 30% compared to that of a traditional mask. The superior visibility increases to the limit allowed by the frame thickness itself (total visibility -5%) and the lateral visibility is equally comparable to the unmasked vision.

High structural rigidity of the central bridge to avoid loss of the plane of the crystals due to an excess of tension of the strip that could cause optical distortions.

Upper and lateral side of the frame with attractive inserts in thermoplastic rubber resulting from the injection of two different materials at the same time using a very advanced technology that until today was used only in high technology components like the keys of the mobile phones.

PENTA incorporates a new system of buckles integrated in the own mount and are oriented in the right direction of tension of the strip. The buckle is, therefore, very protected from possible blows. Only the outside of the pulsator itself allows a very precise adjustment of the voltage.

Completely redesigned, with a wider support area and at the same time flexible but resistant.

Excellent high-end mask for diving and snorkeling.

 

Technical characteristics

- Four crystals with an angle of view in all directions

- Side panels made of curved anti-impact polycarbonate

- Minimum thickness: 6 mm

- Inclined glass 15 ° to increase the lower visibility by more than 30%

- New system of buckles integrated in the own mount with push button

- Throws with a wider support area and at the same time flexible but resistant

- Weight 195 g