Spear Pins Plasma Cressi

Price:
$48.67
Availability:
Temporarily out of stock. Check availability

 

Made with parameters of finishes and very strict dimensions for a maximum adaptation to all types of mechanisms.

Machining done with stainless steel hard metal tools to avoid the contamination of the material of the rod and possible points of rust of the machined zones.

SANDVIK hardened externally by a plasma exclusive vacuum process at high temperature. This process allows the external waist to achieve a hardness of around 60 HRC without impairing the flexural strength of the rod.

Very strict control process (rod by rod before machining) to check the perfect straightness of the rod.

Aletilla in stainless steel of spring AISI 301 of 0,8 mm of thickness. Mechanical strength 1269 Mw / mm2 close to the rod itself. Pin of 2 mm. Completely tinted finish to prevent glare. Length in proportion to the rod; 55 mm in measures of 90 to 120 cm and 70 mm of 130 to 150 cm. Inserted in the rod with a minimum recess in the area close to the pin in order not to reduce the resistance of the tip and to maximize hydrodynamics. Torque closure toric series (red color).

Tetons reinforced with curved radius of mechanization. Polyvalent design for metal and Dyneema howitzers. Material and system of encaje of high tenacity, that guarantees a resistance of 340 kg of tension.

Especially resistant and penetrating insulation tip.

Diameter: Ø6,70 mm and Ø7,5 mm.

Sizes: 120, 125, 130, 135, 140 cm.

Descriptive label on removable paper with indication of diameter, measurement, reference, EAN and technical details.

GTIN:
8435266978107
Reference (SKU):
14705
Manufacturer Product Number:
EFA 411109
Classification:
Spearfishing / Apnea > Spearguns > Rods > Cressi
Available since:
Jun 10, 2017
Product status:
New