1ª Stage T10 Cressi

Price:
$220.54
Availability:
Discontinued

 

1st stage membrane T overcompensated, very modern but at the same time, easy to maintain and very robust and reliable.

The thickness of the body walls have been optimized to minimize its weight (380 g). A semi-flexible elastomer sleeve protects PVT 1st stage from bumps and abrasions.

T configuration allows greater integration of the first stage in the profile of the fitting and, therefore, greater freedom of movement of the head of the diver. The mechanism operates transversely to the air inlet and the possible leakage of particles from the bottle they get sobrepaar the filter does not directly affect the valve.

HP seat is made of stainless steel AISI 316. Apart from the possibility of substitution in case of damage when servicing the composition of the seat, much harder than traditional brass fixed seats, longer service life and better resists the deforming action of the metal particles that may be introduced from the bottle.

Valve high strength polyurethane, oils and the mixtures hyperoxic.

Perfect mechanism movement axially through the valve guide autolubrcante and the mainspring with technology that ensures a stable perfectamete work at any time of the respiratory cycle.

The overcompensation mechanism ensures a slight increase of the intermediate pressure as the pressure drops of the bottle. The controller provides, therefore, its highest level of performance in the final stage of the dive, notoriously the most critical.

An advanced study of the internal air circulation and a camera exclusive distribution channels the air volume outputs directly to the LP minimum levels have allowed pressure drop in forced breaths (0.5 bar), ensuring a high use performance in any situation.

The T10 has an optional isolation kit and Antifreeze SC (Sealed Chamber) which completely isolates the diaphragm and spring from contact with water, making it suitable to operate in extremely low temperature and with very dirty water.

conical filter filtering capacity. Filtarción large effective surface acts as the base and around the side of the cylinder with an area of ​​280 mm2 development. Inserted without circlip because it is blocked by the connecting nut to the faucet.

2 HP ports and 4 LP

It supplied in version INT (stapes) and DIN 300 bar. The thread of the DIN version is made of stainless steel instead of brass to ensure greater resistance in case of falls or blows.


Technical specifications:

- Output High Pressure (HP) 2 - 7/16 "Outputs Low Pressure (LP) 4 - 3/8"
- System / compensation: overcompensated membrane
- Hat type filter without circlip
- Rotating turret: no
- Air flow supplied 4000 L / min (*)
- Intermediate pressure 9-10 bar Fall intermediate pressure (150 bar) 0.5-1 bar
- Outdoor Regulation LP: yes (Allen wrench)
. - Weight: 615 g Int / DIN 480 g
- Supply pressure (INT connection) 0-232 bar
- Supply pressure (DIN connection) 0-300 bar
- Pressure 9.2-9.6 bar taraje
- Scale taraje regulation +/- 0.5 bar


(*) Values ​​measured in a LP outlet with second stage connected and 150 bar pressure in the bottle.

GTIN:
8435266968321
Reference (SKU):
12635
Manufacturer Product Number:
EHZ 820099
Classification:
Scuba Diving > Technical Diving > Regulators > Cressi
Available since:
Nov 5, 2016
Product status:
New